Hahn & Kolb

9 9 4 ● = ON STOCK AT HEADQUARTERS ○ = NO STOCK I TEM Measuring aids \ Feeler gauges 36225... Ident. No. Price/unit, € 420 ● Prod. Gr. 3BF Feeler gauge strip assortment in wall support INOX The organisation system for your workshop Application: For use in various areas of mechanical engineering, e.g. measuring dimensional tolerance between 2 components, as alignment references etc. Execution: Practical bracket for clamping sections of feeler gauge strip 15 feeler gauge cans 12.7 mm x 5 m STAINLESS STEEL Wall-mounted holder made of sheet steel, paint: RAL 7035, light grey Technical data: Min./max. length of application area: 0.01-0.25 mm Nominal dimension in assortment: 0.01-0.1 mm, increasing by 0.01 mm | 0.12 mm | 0.15 mm | 0.18 mm | 0.2 mm | 0.25 mm Length x width x height: 330 x 100 x 110 mm Underlay foils in precision design Standard widths 12.7/50/100/150/300 mm Application: For setting up tools, adjusting devices, com- pensating for tolerances, supporting instru- ments, aligning machines, setting up forms, adjusting bearing play, adjusting composite units, readjusting cutting blades, aligning workpieces, etc. The following materials are available: hardened spring steel, material no. 1.1274 With a carbon content of over 1%, this material is ideally suited for feeler gauge bands, support sheets and springs subject to high loads for which there are no corrosion requirements. This material is magnetic. cold-rolled INOX spring steel, material no. 1.4310 This material is an alloy of 17% chromium and 7% nickel and has good corrosion resistance. This material is cold-rolled to achieve high strength. The material is therefore ideal for stainless precision gauge bands, underlay foils, stainless steel springs and higher-strengths parts. This material is only slightly magnetic and therefore cannot be clamped when grinding on magnetic chucks. cold-rolled, spring-tempered brass band, material no. 2.0321 With a composition of 63% copper and 37% zinc, this material is the standard grade for spring-tempered rolled brass. This material is not magnetic. Min./max. length measuring range 1-6 mm 4-15 mm 15-30 mm 30-45 mm 36360... Ident. No. Price/unit, € 010 ● 040 ● 150 ● 300 ○ Prod. Gr. 361 Ident. No. 010 Bore plug gauge Application: For measuring bores Execution: Knurled handle Hardened and ground bolt Technical data: Scale value: 0.1 mm Material: Stainless steel Taper ratio: 01:10 Min./max. length measuring range 0.5-7 mm 0.5-11 mm 36370... Ident. No. Price/unit, € 010 ● 020 ● Prod. Gr. 361 Wedge gauge Application: For measuring gaps and clearances Execution: Made from hardened steel, hard-chrome plated Advantage: Fast and reliable reading of measured values Technical data: Scale value: 0.1 mm Material: Steel 36380... Ident. No. Price/unit, € 020 ● Prod. Gr. 361 Metric drill gauge Application: For quickly determining drill and mill diameters. Execution: Made from special steel, nitrided Technical data: Min. diameter of measuring range: 0.1 mm Max. diameter of measuring range: 10 mm Pitch: 0.1 mm Number of holes: 100 PCS