Hahn & Kolb

1 0 5 2 ● = ON STOCK AT HEADQUARTERS ○ = NO STOCK I TEM Force measurement and weighing technology \ Tensile and compressive force measuring instruments Display units for external force or torque recorder with or without encoder (measurement channel extension) Application: Can be used in combination with external force and/or torque recorders for a wide range of testing tasks. The main areas of application for these handheld force testers are in quality assurance, incoming goods inspection, production, research and development. Execution: Robust aluminium housing with ergonomic grip recesses Modern, colour touchscreen display 128x128 pixels, 7 digit + comma Data logger/measured value recording via built-in 2 GB memory, used via USB 3.0 Exported data output to ASCII/CSV Adjustable measuring frequencies from 50 Hz to 2000 Hz Ident. No. 400: without encoder Ident. No. 405: with encoder (measuring channel extension) for connecting to a path measurement system (test stands) or for additional use of an external force or torque recorder Advantage: For the use of external force and/or torque recorders with TEDS (Transducer Electronic Data Sheet) technology Rechargeable lithium-ion batteries ensure a long operating life Measured value display is flexible and intuitive to configure Two M6x10 mounting screws on each face and on the rear which can be used e.g. for a fixed installation Ident. No. 405: Encoder enables interactions with motorised load frames (test stands) for e.g. the display of force/path diagrams Delivery: Display unit; USB power supply unit; micro SD card 2 GB; CE declaration of conformity; manual Notes: TEDS (Transducer Electronic Data Sheet) enables „plug and measure“. The display unit allows in the sensor identification data, which is stored in the form of an electronic data sheet in the TEDS chip. This facilitates the use of external force and/or torque recorders significantly. 44181... without encoder Ident. No. Price/unit 400 ● 44181... with encoder Ident. No. Price/unit 405 ● Prod. Gr. 486 ATORN tensioning and compression force recorder ZD1 (DIN 50100) ready made incl. plug and TEDS module Technical data: Sensitivity of force sensor: 2 mV/V Max. supply voltage: 10 V Min./max. force of meas- uring range 0-10 N 0-20 N 0-50 N 0-100 N 0-200 N 0-500 N 0-1000 N 0-2000 N 0-5000 N 0-10000 N 0-20000 N Height (mm) 52 52 52 52 52 52 72 72 72 72 72 Width (mm) 22 22 22 22 22 22 25 25 25 25 25 Depth (mm) 54 54 54 54 54 54 70 70 70 70 70 Fastening thread M6 M6 M6 M6 M6 M6 M12 M12 M12 M12 M16 44181... Ident. No. Price/unit 495 ○ 501 ○ 505 ○ 510 ○ 515 ○ 520 ● 525 ○ 530 ○ 535 ● 540 ○ 545 ○ Prod. Gr. 4CD Min./max. force of measuring range 0-1 kN 0-2 kN 0-5 kN 0-10 kN 44181... Ident. No. Price/unit 550 ○ 555 ○ 560 ○ 565 ○ Prod. Gr. 4CD Compression force recorder D1 (DIN 50100) ready made incl. plug and TEDS module Technical data: Outer diameter: 50 mm Piston diameter: 13 mm Protruding piston height: 7 mm Fastening thread: M5 Sensitivity of force sensor: 2 mV/V Cable length: 3 m Max. supply voltage: 15 V