Hahn & Kolb

1 0 5 6 ● = ON STOCK AT HEADQUARTERS ○ = NO STOCK I TEM Force measurement and weighing technology \ Force measuring cells D1 H D2 Force measuring cell with analogue measurement display Application: For static and quasi-static force measurement on machines and equipment, e.g. hydraulic presses, rolling machines, calenders, bending machines, strength testing machines, torque meters etc. Execution: Analogue manometer, diameter 63 mm with trailing pointer Force measuring cell made from VA steel in slim design Integrated throttle damping Two M6 fixing threads on housing floor Error limit 2% of final value Advantage: Very slim design for in constricted spaces Integrated throttle damping for light, abrupt loading and unloading Delivery: With calibration certificate, in plastic case Technical data: Protruding piston height: 2 mm Fastening thread: 2 x M6 Error limit, based on end value: 2% Manometer diameter: 63 mm Min./max. force of meas- uring range 0-0.16 kN 0-0.25 kN 0-0.6 kN 0-1 kN 0-1.6 kN 0-2.5 kN 0-6 kN 0-10 kN 0-16 kN 0-25 kN 0-60 kN 0-100 kN Scale value, force (kN) 0.005 0.005 0.01 0.02 0.05 0.05 0.1 0.2 0.5 0.5 1 2 Outer Ø (mm) 75 75 75 75 75 75 75 75 75 75 90 90 Overall height of force sensor (mm) 30 30 30 30 30 30 30 30 30 30 32 32 Piston Ø (mm) 45 45 45 45 45 45 45 45 45 45 56 56 Fastening thread clear- ance (mm) 55 55 55 55 55 55 55 55 55 55 75 75 Mean distance between manometer and force sensor (mm) 82 82 82 82 82 82 82 82 82 82 90 90 44420... Ident. No. 021 ● 031 ● 051 ● 061 ● 071 ● 081 ● 101 ● 111 ● 121 ● 131 ● 151 ● 161 ● Prod. Gr. 490 Other hydraulic force measuring cells Application: The ring-shaped force measuring cell is princi- pally employed where mechanical engineering elements (shafts, spindles, clamping bolts, draw bolts, tension bolts or the like) must be routed through the pressure hull, for example, to measure axial forces on machine tools. Technical data: Measurement ranges: 0–1 kN to 0–2.5 MN Error limit: < +/- 1% Delivery of the electric force sensors For combination with the display units MMV 22 and MEC-9163, the force sensors are supplied with connecting plugs and characteristic curve adjustment For connecting the force sensors to display units from other manufacturers, they will be supplied with bare ends and without characteristic curve adjustment Ident. No. 030–040 suspended scales up to 200 kg practical suspended scales within reach at all times Application: For rapid checking of weights with high mobility. Execution: Large LED display Display units: kg/lb/N Functions: AUTO OFF Pull-out tape measure, length 1 m Data hold function (weight display can be frozen for 5 s) Tara button for zeroing under load Delivery: With battery