Hahn & Kolb

1 0 7 9 FOR MORE DETAI LS OR PRODUCTS , PLEASE VI S I T OUR ONL INE SHOP WWW.HAHN-KOLB.COM Electric testing devices \ Voltage testers Application: Ident. No. 027–037: for use in all installation fields and renewable energy sectors. CAT IV 690 V, CAT III 1000 V. Tested and approved in line with DIN EN 61243-3(VDE 0682-401):2015. Ident. No. 056: For checking that cables are de-energised, also suitable for very robust applications up to 600 V AC/DC. Execution: Ident. No. 027: Continuity test (acoustic/visual) Cable break detector Diode test Voltage display from 50 V even for empty batteries TRUE RMS Displays high voltages Ident. No. 032: Continuity test (acoustic/visual) Cable break detector Voltage display from 50 V even for empty batteries Displays high voltages Ident. No. 037: no batteries required displays high voltages Ident. No. 056: Complies with DIN EN 61243-3:2015 and IEC 61243-3:2014 Can be used on electric circuits in overvoltage categories up to CAT III 600 V and CAT II 690 V tester handle locking mechanism for single-handed operation on sockets and for safe storage cable break detector (from an alternating voltage of approx. 200 V) external conductor tester (single-pole external conductor test possible in earthed systems) fully functional voltage display if batteries are flat or removed Ident. No. 056 Ident. No. 037 Ident. No. 032 Ident. No. 027 two-pole voltage testers (EN standard 61243-3) in accordance with VDE0682 Part 401 Model PROFIPOL+ DUSPOL, analogue DUSPOL expert DUSPOL digital Display LED | Audible LED/moving coil LED | Audible LED/LCD | Audible Min./max. voltage range AC 12-690 V/AC 12-1000 V/AC 12-1000 V/AC 1-1000 V/AC Min./max. voltage range DC 12-690 V/AC 12-1000 V/DC 12-1000 V/DC 1-1200 V/DC Min./max. frequency - - - 1 / 1000 Hz Min./max. continuity test 0-100 kOhm - 0-100 kOhm 0-100 kOhm Min./max. electrical-resistance measuring range - - - 0.1 kOhm-300 kOhm Phase-sequence test No Yes Yes Yes Phase sequence test Yes Yes Yes Yes Polarity testing Yes Yes Yes Yes Vibration control system No Yes Yes Yes Measurement point lighting No No Yes Yes Length x width x height - 330 x 85 x 55 mm 330 x 85 x 55 mm 330 x 85 x 55 mm IP protection class IP 54 IP 65 IP 65 IP 65 Weight (kg) 0.190 0.350 0.370 0.380 Overvoltage protection category CAT III/600 V | CAT II/690 V CAT IV/600 V | CAT III/1000 V CAT IV/600 V | CAT III/1000 V CAT IV/600 V | CAT III/1000 V two-pole voltage testers 75017... Ident. No. 056 ● 037 ● 032 ● 027 ● DUSPOL quick-access case 75017... Ident. No. 111 ● 111 ● 111 ● 111 ● Prod. Gr. 751 SDT 1 socket tester With finger contact for active PE error detection Application: fast and simple testing for correct connection of shockproof sockets Execution: clear indication of wiring faults (missing PE, N and L conductors, inversion of L and PE conductors) via 3 LEDs easy-to-understand status table provides infor- mation on correct connection (OK, green) and the type of fault (red) active PE test with contact electrode, LCD warns of dangerous contact voltage (greater than 50 V) at the protective earth connection (PE) test button for triggering 30-mA fault current/RCD circuit breaker voltage is supplied via test object (no batteries required) Technical data: Min./max. frequency: 50 / 60 Hz Length x width x height: 80 x 72 x 78 mm Overvoltage protection category: CAT II/300 V 75024... Ident. No. 105 ● Prod. Gr. 751