Hahn & Kolb

8 8 2 ● = ON STOCK AT HEADQUARTERS ○ = NO STOCK I TEM Hand-held devices \ Vernier callipers Pocket vernier callipers with round scale (DIN 862) Application: For measuring external, internal, step and depth dimensions. Execution: Depth gauge also covers the rack to protect it from chips Rotating dial with clamp No. 31163 010–31167 810, 31169 025–31169 035: Round scale, 32 mm diameter No. 31167–31169: Shock-resistant measuring mechanism No. 31169 010–31169 020: Round scale, diameter 32 mm No. 31169 025–31169 035: With drive wheel Delivery: No. 31163 010–31169 020: In a case No. 31169 025–31169 035: In case No. 31169 020 No. 31163 020 Min./max. length measuring range 0-150 mm 0-150 mm 0-150 mm 0-200 mm 0-300 mm Type of locating With locking screw With locking screw With locking screw With locking screw With locking screw Length of jaw (mm) Scale value (mm) Depth gauge rod Measurement travel of one pointer revolution (mm) 31163... Ident. No. 31167... Ident. No. 31169... Ident. No. 31169... Ident. No. 31169... Ident. No. 40 0.01 Flat 1 010 ● - - 010 ● - - - - 40 0.02 Flat 2 020 ● - - 020 ● - - - - 40 0.02 Flat 1 - - 810 ● - - - - - - 50 0.02 Flat 2 - - - - - - 025 ● - - 64 0.02 Flat 2 - - - - - - - - 035 ● Price/unit, € ORION = Prod. Gr. 3BH TESA = Prod. Gr. 362 Degrees of protection against dust Degrees of protection against water IP first number IP second number 0 Not protected 0 Not protected 1 Protected against solid foreign bodies 50 mm in diameter and larger 1 Protected against dripping water 2 Protected against solid foreign bodies 12.5 mm in diameter and larger 2 Protected against dripping water where housing is inclined at angle of up to 15° 3 Protected against solid foreign bodies 2.5 mm in diameter and larger 3 Protected against spray 4 Protected against solid foreign bodies 1.0 mm in diameter and larger 4 Protected against splash water 5 Dust-protected 5 Protected against hose water 6 Dust-proof 6 Protected against heavy jets of hose water 7 Protected against impact of temporary submersion in water 8 Protected against impact of continual submersion in water IP degrees of protection in accordance with DIN EN 60529 Ref. no. 112 Electronic pocket vernier calipers (DIN 862) with data output Application: For measuring external, internal, step and depth dimensions. Execution: ON/OFF Zero setting at any position ABS function High-contrast display Ident. No. 104–105: mm/inch changeover AUTO OFF Keeptronic system Ident. No. 112–301: mm/inch switch-over Auto off Keeptronic System Advantage: Ident. No. 104–105: key lock to prevent unintentional adjustment Switched on using the ON button or automati- cally switched on by calliper movement Ident. No. 112–301: Key lock to prevent unintentional adjustment Switched on by the ON button or automatically switched on by calliper movement Delivery: Ident. No. 104–105: In a case, with battery (1 x 3 V lithium, type CR 2032) Ident. No. 112–301: In a case, with battery (1 x 3 V lithium type CR 2032) multiCOM p. 1018 Data transmission type No multiCOM Min./max. length measuring range Digit increment (mm) Length of jaw (mm) Depth gauge rod Depth gauge rod thickness (mm) Preset function Digit height (mm) 31173... Ident. No. 31173... Ident. No. 0-150 mm 0.01 40 Round 1.5 No 11 104 ● - - 0-150 mm 0.01 40 Flat - No 11 105 ● - - 0-150 mm 0.01 40 Round 1.5 Yes 8.5 - - 112 ●