© AS Würth 04/25 SISEKUUSKANTPOLT Silinderpea ISO 4762* 8.8 Tsink Flake 10.9 Tsink Flake 12.9 Tsink Flake (ZFSHL) Ø mm Pikkus L mm dk k1 AV Tsink Flake 8.8 Tsink Flake 10.9 Tsink Flake 12.9 6 20 10 6 5 4149 46 20 8 16 13 8 6 4149 48 16 4150 48 16 30 13 8 6 4149 48 30 4150 48 30 10 30 16 10 8 4149 410 30 35 16 10 8 4150 410 35 40 16 10 8 4149 410 40 100 16 10 8 4149 410 100 4150 410 100 12 30 18 12 10 4149 412 30 35 18 12 10 4166 412 35 40 18 12 10 4150 412 40 45 18 12 10 4149 412 45 4166 412 45 50 18 12 10 4166 412 50 55 18 12 10 4150 412 55 4166 412 55 60 18 12 10 4149 412 60 4150 412 60 4166 412 60 65 18 12 10 4150 412 65 70 18 12 10 4149 412 70 4150 412 70 80 18 12 10 4149 412 80 14 70 21 14 12 4149 414 70 110 21 14 12 4149 414 110 16 50 24 16 14 4149 416 50 4166 416 50 70 24 16 14 4150 416 70 90 24 16 14 4149 416 90 100 24 16 14 4150 416 100 120 24 16 14 4150 416 120 20 50 30 20 17 4150 420 50 80 30 20 17 4149 420 80 4150 420 150 150 30 20 17 24 150 36 24 19 4150 424 150 CL01_3511140175, Rev: 0.307, State: 02. 05. 2024 Würth International AG, CH-7004 Chur • Diameter ≥ M10 - 720h* • * Guideline values: No base metal corrosion at points without thread in salt spray mist testing according to DIN EN ISO 9227 NSS. The designation ZFSHL refers to the following corrosion coating: • Zinc-flake coating, with top coat, silver colour, with friction value adjusted lubrication. • Adjusted friction coefficient range from 0.09μ – 0.14μ due to top coat with integrated lubricating particles COMPANY Notice ISO 4762 replaces DIN 912 | There is some similarity | Nominal range changed | Fine thread moved to ISO 12474. *ISO 4762 asendab DIN 912 | Mingi sarnasus on | Nimivahemik muudetud | Peenkeere teisaldati standardile ISO 12474. 155
RkJQdWJsaXNoZXIy NzYwOTI=